SDA Temperature and Humidity Monitor
It is critical to monitor temperature and humidity in a dive system in order to ensure the well-being of divers.
A relatively small change in temperature is hazardous due to the thermal conductivity of helium and high humidity can encourage microbial growth which may cause health problems.
The SDA Temperature and Humidity Monitor will keep your diving bell, dive suits or diving chamber comfortable and safe for your divers.
The Canadian Fleet Diving Unit say "We use the SDA range on our recompression chambers. They have been working very well for us, maintenance is minimal and they do a great job of monitoring the environment inside the chambers."
Key features of the SDA temperature and humidity monitor
- Intelligent sensors flag when calibration and sensor changes are due
- Large full colour display
- Datalogging available
Where can it be used?
The SDA temperature and humidity can be used in dive chambers and diving bells. The probe can either be located in the dive chamber or the gas pipework.
It is also available with a water temperature transmitter for monitoring hot water to dive suits or monitoring sea water temperature outside the diving bell.
Spares and accessories
|XK0-662||24V DC UK plug panel mount power supply 40W|
|XK0-667||24V DC universal plug panel mount power supply 40W|
|XK0-447K||SDA CO2 5001 USN compatibiity plate (SDA O2)|
Replacement CO sensor (SDA CO)
|MECCOBBBP||MEC CO module (0 to 20ppm)|
|2533-1005||Power supply filter for bridge and deck zone use (Lloyds test spec 1 compliance)|
|SDAMONCON||SDA Phoenix connector pack|
|SDAOMCURRENT||4-20mA output module with 2 off relays|