SDA CO2 carbon dioxide monitor
The SDA CO2 carbon dioxide monitor is a comprehensive analyser which uses our 5S3 infra red sensor.
It is compliant with DNV, IMCA, Lloyds, ABS and ADCi requirements and has a five-year sensor life.
The Canadian Fleet Diving Unit say "We use the SDA range on our recompression chambers. They have been working very well for us, maintenance is minimal and they do a great job of monitoring the environment inside the chambers."
- Intelligent sensors flag when calibration and sensor changes are due
- Large full colour display - for easy viewing of measurements
- Temperature compensated - regular CO2 sensors detect less CO2 at higher temperatures
- Datalogging available
Carbon dioxide (CO2)
Where can it be used?
The SDA CO2 carbon dioxide monitor can be used in air diving and saturation diving to monitor the air supplied to divers. A sample line from the area you wish to monitor (e.g. a pressure chamber) needs to be linked up with the monitor in the area you wish to check gas levels from.
Spares and accessories
|XK0-662||24V DC UK plug panel mount power supply 40W|
|XK0-667||24V DC universal plug panel mount power supply 40W|
|XK0-447K||SDA CO2 5001 USN compatibiity plate (SDA O2)|
Replacement CO sensor (SDA CO)
|MECCOBBBP||MEC CO module (0 to 20ppm)|
|2533-1005||Power supply filter for bridge and deck zone use (Lloyds test spec 1 compliance)|
|SDAMONCON||SDA Phoenix connector pack|
|SDAOMCURRENT||4-20mA output module with 2 off relays|